Ultracortex Mark 1

Files related to the Ultracortex, the 3D-printable EEG headset compatible with OpenBCI (currently under development).

The electrodes seen in the photos here are dry electrodes from Florida Research Instruments (FRI), found here.

The FRI_electrode_mount.stl was modeled to serve as a mechanical mount for the FRI electrodes.

The screws and nuts used to fasten the FRI electrode to the FRI_electrode_mount are:

• Screws: #2-56 Brass (1/2" length). For variations in head style, see here
• Nuts: #2-56 Brass
• Ground clip to fasten between the nuts and solder the electrode to: Solder Lug

Image References